Paradyne 3160-A3 Operator's Manual page 59

10. When you are through changing the community name, you must press F3
11. Press F1 (Next) until the Access 1 configuration option appears.
3160-A2-GB21-90
5. Select Mgmt.
Edit:
User Alarm
F1 F2
6. From the Mgmt Config screen, select Gen.
Mgmt Config:
Gen Trap
F1 F2
7. Press F1 (Next) until the CommunityName1 configuration option appears.
8. Press F2 (Edit) to edit the community name.
CommunityName1:
Next Edit
F1 F2
NOTE:
Steps 9 and 10 describe the process for entering text strings for Mgmt
configuration options. This process applies to entering any text strings into
Mgmt configuration options.
9. Use the and keys to position the cursor under the character you want
to change. Press F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
public
Up Down
F2
F1
The F1 (Up) key scrolls through the ASCII character set in the following order:
numbers (0–9), lowercase letters (a–z), uppercase letters (A–Z), space
character, ASCII symbols (ascending order, based on ASCII code), and the
End of Line symbol (
(Save) to save the value. Otherwise, the original value will be retained.
February 2001
Mgmt
F3
F3
Clear
F3
Save
F3
) The erases all characters to the right of the cursor.
3. Operation
3-25