System Group, Mib Ii - Paradyne 3160-A3 Operator's Manual

System Group, MIB II

The System Group objects are fully supported by the DSU/CSU. The following
sections provide clarification for objects contained in the System Group where it is
not otherwise clear how the object definition in MIB II is related to the DSU/CSU.
Objects not mentioned are supported as stated in the MIB.
System Group – "sysDescr" Object (system 1)
This object provides the full name and version identification for the system
hardware and software. This object displays the following string:
[ Company Name ] T1 DSU/CSU; model xxxx-xx-xxx ; S/W Release: yy.yy.yy ; H/W
CCA1: zzzz-zzz; H/W CCA2: zzzz-zzz ; Serial number: ssssssss.
System Group – "sysObjectID" Object (system 2)
This object provides the authoritative identification of the network management
subsystem contained in the unit.
This object displays the following object identifier:
System group – "sysContact" Object (system 4)
This object provides a textual identification of the contact person for this managed
node.
System Group – "sysName" Object (system 5)
This object provides an administratively assigned name for this managed node.
System Group – "sysLocation" Object (system 6)
This object provides the physical location of this node.
3160-A2-GB21-90
Where:
xxxx-xx-xxx represents the full model number of the unit.
yy.yy.yy represents the software revision number of the unit.
zzzz-zzz represents the hardware revision number of the unit.
ssssssss represents the serial number of the unit.
3160 [ Company OID ].1.14.2.2.1
3164 [ Company OID ].1.14.2.2.2
3165 [ Company OID ].1.14.2.2.3
3161 [ Company OID ].1.14.2.2.4
February 2001
E. SNMP MIB Objects
E-3