Paradyne 3160-A3 Operator's Manual page 155

Paradyne acculink dsu / csu operator's guide 3160-a3, 3161-b3, 3164-a2, 3165-a2
Table of Contents

Advertisement

Table C-4. DTE Channel Configuration Options
3160-A2-GB21-90
DTE Channels:
Assign
Voice
DTE Drop/Insert (DSX-1) Channel. Assigns DS0 channels from the DTE Drop/Insert
(DSX-1) interface to DS0 channels on the network interface, and specifies which DS0
channels carry voice signaling information.
Assign – Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface.
Voice – Specifies which DS0 channels from the DTE Drop/Insert (DSX-1) interface are
voice channels and should pass Robbed Bit Signaling (RBS) information to the network
interface.
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 ... N24
DTE Drop/Insert (DSX-1) Channel Allocation. Assigns DS0 channels from the DTE
Drop/Insert (DSX-1) interface to the network interface.
Line 1 displays the 24 channels for the network interface. Line 2 displays what is allocated
to the DS0 channel indicated in Line 1. Possible values for Line 2 are:
Value
Meaning
This DS0 channel is not allocated. You can modify this value on
this screen.
Prt n
This DS0 channel is allocated to port n, where n is a number from
1 to 4. You cannot modify this value on this screen.
D n
This DS0 channel is allocated to the DTE Drop/Insert (DSX-1)
interface DS0 channel n , where n is a number from 1 to 24. You
can modify this value on this screen.
Assign DTE channels to network channels by pressing the Function key below the
network channel desired. The DTE channel number scrolls up one number each time you
press the Function key. Only unassigned DTE channels appear during scrolling.
D1
D2
D3
D4
D5
RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS ... RBS
Specify DTE Drop/Insert (DSX-1) Voice Channels. Specifies which DS0 channels from the
DTE Drop/Insert (DSX-1) interface are voice channels and should pass Robbed Bit
Signaling information to the network interface.
Line 1 displays the 24 channels for the DTE Drop/Insert (DSX-1) interface. Line 2 displays
whether the DS0 channel indicated in Line 1 is a voice or data channel. Possible values
for Line 2 are:
Value
Meaning
RBS
This DS0 channel is a voice channel carrying RBS information.
When this DS0 channel is assigned to a network DS0 channel,
RBS information is preserved across the connection.
Data
This DS0 channel is a data channel that does not contain RBS
information. Signaling is not preserved across the connection.
Press the Function key below the desired channel to toggle between RBS and Data.
February 2001
D6
D7
D8
D9
D10
C. Configuration Options
D11 D12
D13 ... D24
...
-
C-11

Advertisement

Table of Contents
loading

Table of Contents