Operation
Overview
This chapter contains information for operating your DSU/CSU. It includes a
description of the front panel and sample procedures for configuring the
DSU/CSU.
Using the Front Panel
The standalone DSU/CSU front panel
Panel) consists of an LCD, a keypad, test jacks, and 12 LEDs. The
carrier-mounted DSU/CSU faceplate contains test jacks and 12 LEDs, however,
the LCD and keypad are located on the Shared Diagnostic Control Panel (SDCP)
of the 3000 Series Carrier. For more information about the SDCP, refer to the
COMSPHERE 3000 Series Carrier Installation Manual .
3160-A2-GB21-90
NOTE:
Additional information for the carrier-mounted DSU/CSU is located in the
ACCULINK 3151 CSU and 3161 DSU/CSU General Information Guide and
the COMSPHERE 3000 Series Carrier Installation Manual .
NOTE:
You can display a graphical representation of the DSU/CSU front panel on an
Appendix G, Front Panel Emulation
attached PC (see
February 2001
(Figure 3-1, Standalone DSU/CSU Front
).
3
3-1