Table of Contents
Advertisement
H. Asynchronous Terminal Operation
Initiating an Asynchronous Terminal Session
Once the appropriate configuration option changes have been made and access is
established, the Main Menu screen appears (unless a password is required).
Figure H-1, Main Menu
DSU/CSU.
The carrier-mounted DSU/CSU shows the 3000 Series carrier slot number under
the Customer ID. The slot number field (e.g., Slot: 1) is changed to access specific
DSU/CSUs in the carrier. For Telnet or SNMP access to the carrier, specify the IP
address of the applicable communication port (see
Addressing Scenarios
If a password is required, the Login screen displays the prompt for password input.
(Refer to
To move between the Screen area and the Screen Function Keys area
(Figure H-1, Main Menu
From the Screen area, you may select the Status, Test, Configuration, or
Control branches.
H-2
Screen, shows the Main Menu screen for a standalone
).
NOTE:
By convention throughout this appendix, examples of screens are shown as
they appear with the standalone DSU/CSU.
Entering a Password to Gain Access
Screen), press Ctrl-a (Control key and a).
February 2001
Appendix F, IP Network
on page H-14.)
3160-A2-GB21-90
Advertisement
Table of Contents
