Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Paradyne ACCULINK 3163 DSU
Summary of Contents for Paradyne ACCULINK 3163 DSU
- Page 1 ACCULINK 3163 DSU/CSU QUICK REFERENCE Document No. 3163-A2-GL10-00...
- Page 2 Further, Paradyne Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of Paradyne Corporation to notify any person of such revision or changes.
-
Page 3: Quick Reference
It also helps us maintain competitive prices for our products. Complete documentation for this product is available at www.paradyne.com. Select Service & Support Technical Manuals T1/E1 Digital Access Devices. - Page 4 5. The Factory 1 configuration for ESF framing format and B8ZS line coding format is the default configuration and is appropriate for most networks. If this configuration does not work for you, try the Factory 2 configuration for D4 framing format and AMI line coding format.
-
Page 5: Configuration Options
Configuration Options Configuration options are accessed from the Configuration branch of the front panel menu. DSU ESF Test Ctrl Stat Cnfig Call ClrReg DevHS STest Perf TStat LED Reset Passwd Telco User Prtn T1 Prtn User Prt1 Near Pass Dial Disc ChDir Cur 24Tot Intvl... - Page 6 Factory default configuration options are shown in boldface type in the following tables. Table 1. Port Configuration Options (1 of 2) Option Factory 1 Factory 2 Comments/Description E530 E530 V.35 V.35 Selects the port type: EIA-530A, Selects the ort ty e: EIA-530A, Port Type: Port Type: V.35, RS449, or X.21.
- Page 7 Table 2. Network Interface Configuration Options Option Factory 1 Factory 2 Comments/Description NET Framing: NET Framing: Selects D4 or ESF framing format Selects D4 or ESF framing format. Selects AMI or B8ZS line coding Selects AMI or B8ZS line coding NET Coding: NET Coding: format.
- Page 8 Table 3. Channel Configuration Options (1 of 2) Option Factory 1 Factory 2 Comments/Description Block Block Determines how channels are Determines how channels are ACAMI ACAMI Assign By: assigned: contiguous blocks, ACAMI or individual channels. Chan Chan 64 (56) 64 (56) 128 (112) 128 (112) 192 (168)
- Page 9 Table 3. Channel Configuration Options (2 of 2) Option Factory 1 Factory 2 Comments/Description Clears (unassigns) channels for Clear Clear this port. N1 (D1) N1 (D1) N2 (D2) N2 (D2) N3 (D3) N3 (D3) N4 (D4) N4 (D4) N5 (D5) N5 (D5) N6 (D6) N6 (D6)
- Page 10 Table 4. General Configuration Options Option Factory 1 Factory 2 Comments/Description Selects the clock source to be Clock Src: Clock Src: used as the master clock for the Prt1 Prt1 DSU/CSU. SU/CSU Enab Enab Specifies whether the durations of Tst Timeout Tst Timeout user-initiated tests are limited by i iti t d t...
- Page 11 Table 5. User Configuration Options (2 of 3) Option Factory 1 Factory 2 Comments/Description Controls whether the COM port Controls whether the COM ort Com Clk: Com Clk: uses an internal or external clock. Com Rate: Com Rate: Selects the bit rate for the COM (Communication Port port.
- Page 12 Table 5. User Configuration Options (3 of 3) Option Factory 1 Factory 2 Comments/Description Selects the bit rate for the MODEM Selects the bit rate for the MODEM Modem Rate: Modem Rate: port. MChar Len: Selects the character length for the Selects the character length for the (Modem Port (Modem Port...
- Page 13 Table 6. Alarm Configuration Options Option Factory 1 Factory 2 Comments/Description Disab Disab Does not display alarm messages. Sends alarm messages to Modem Modem Modem port. Alrm Msg: Sends alarm messages to COM port. Sends alarm messages to both Both Both ports.
- Page 14 Table 7. Management Configuration Options Option Factory 1 Factory 2 Comments/Description Edit Edit The IP address needed to access The IP address needed to access IP Adr: IP Adr: the device. Clear Clear Edit Edit The Subnet Mask needed to The Subnet Mask needed to NetMask: NetMask:...
-
Page 15: Important Safety Instructions
Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. When an ac power source is used, this product is intended to be used with a 3-wire grounding type plug –... -
Page 16: Emi Warnings
The authority to operate this equipment is conditioned by the requirements that no modifications will be made to the equipment unless the changes or modifications are expressly approved by Paradyne Corporation. WARNING: To Users of Digital Apparatus in Canada: This Class A digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.