Entering A Password To Gain Access - Paradyne 3160-A3 Operator's Manual

3. Operation

Entering a Password to Gain Access

You are prompted to enter a password (up to 8 characters) when you are
accessing a port whose Password configuration option is set (refer to the previous
section,
Valid password characters are 0-9, a-z, A-Z, #, -, ., and /. The existing password is
not shown on the screen. An underscore in the first position shows where to enter
the first character. If the password is set to all null characters (default value), press
F3 (Done) when the password screen first appears.
The following screen appears when you access a DSU/CSU that has a password
enabled.
3-50
5. Use the and keys to position the cursor under the desired character.
You must enter a character before the
to the right.
Passwd: xxxxxxxx
Up Down
F1 F2
6. Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. Valid password
characters are 0-9, a-z, A-Z, #, -, ., and /. Press F3 (Save) to save the
password.
Passwd: xxxxxxxx
Up Down
F1 F2
Setting a Password
Passwd:_
Up Down
F1 F2
February 2001
moves the cursor to the next space
Save
F3
Save
F3
on page 3-49).
Done
F3
3160-A2-GB21-90