wsm RTV-X1120D Workshop Manual page 66

RTV-X900, RTV-X1120D, WSM
Checking Hydraulic Oil Line
1. Check to see if the hoses and hose clamps are tight and not
damaged.
2. If hoses and clamps are found to be worn or damaged, replace
or repair them at once.
(1) Hydraulic Pump → Control Valve
(2) HST→ Oil Tank
(3) Control Valve ←→ Lift Cylinder
(4) Control Valve → Power Steering Unit
(5) Oil Tank → HST
(6) Power Steering Unit → Oil Cooler
(7) Oil Cooler → Oil Tank
(8) Oil Cooler
(9) Oil Tank → Hydraulic Pump
(10) Hydraulic Pump
(11) Power Steering Hose (Power Steering Unit → Oil Cooler)
(12) Power Steering Hose (Power Steering Unit ←→ Power Steering Cylinder)
(13) Power Steering Hose
(With Hydraulic Dump: Power Steering Unit ← Control Valve,
Without Hydraulic Dump: Power Steering Unit ← Hydraulic Pump)
(14) Power Steering Unit
(15) Power Steering Cylinder
[A] Only With Hydraulic Dump
G-45
GENERAL
9Y1210946GEG0049US0
KiSC issued 01, 2014 A