wsm RTV-X1120D Workshop Manual page 148

RTV-X900, RTV-X1120D, WSM
Dismounting Transmission and Engine One Piece Assembly
1. Remove the mission upper support (2) and collars (1).
2. Set the hand pallet trucks (5) as shown figure.
3. Lift the mainframe by using hoist as shown in figure.
4. Remove the mission mounting bolts and nuts.
5. Disconnect the 4WD propeller shaft (6).
6. Remove the transmission and engine one piece assembly (7).
(When reassembling)
• Apply grease (RAILMASTER or equivalent) to 4WD propeller
shaft (6).
• Transmission and engine one piece assembly (mission frame)
into the main frame, do not forget to assemble the 4WD
propeller shaft (6) as well.
Mission frame mounting
Tightening torque
bolt and nuts
(1) Collar
(2) Mission Upper Support
(3) Main Frame
(4) Mission Frame
Mission Frame
1. Lift the transmission and engine one piece assembly (1) with
mission frame (2).
2. Remove the mission frame (2).
(1) Transmission and Engine One
Piece Assembly
1-S39
ENGINE
77.5 to 90.2 N·m
7.90 to 9.20 kgf·m
57.2 to 66.5 lbf·ft
(5) Hand Pallet Truck
(6) 4WD Propeller Shaft
(7) Transmission and Engine One
Piece Assembly
9Y1210946ENS0048US0
(2) Mission Frame
9Y1210946ENS0049US0
KiSC issued 01, 2014 A