RTV-X900, RTV-X1120D, WSM
[3] CHECK POINTS OF EVERY 50 HOURS
Checking Engine Start System
WARNING
To avoid serious injury:
• Do not allow anyone near the vehicle while testing.
• If the vehicle does not pass the test do not operate the
vehicle.
Preparation before testing.
1. Place all control levers in the NEUTRAL position.
2. Set the parking brake and stop the engine.
Test: Range gear shift lever safety switch
1. Sit on the operator's seat.
2. Shift the range gear shift lever to H position.
3. Return the Speed control pedal to the NEUTRAL position.
4. Shift the hydraulic lift cylinder lever to the NEUTRAL position.
5. Turn the key to START position.
6. The engine must not crank.
7. Repeat the step 2 to 6 with the range gear shift lever at L and R
each position.
8. If it cranks, adjust or replace the required safety switch.
(1) Range Gear Shift Lever
(2) Speed Control Pedal
G-30
GENERAL
(3) Hydraulic Lift Cylinder Lever
9Y1210946GEG0036US0
KiSC issued 01, 2014 A