wsm RTV-X1120D Workshop Manual page 469

RTV-X900, RTV-X1120D, WSM
Traveling Speed Sensor Connector Voltage
NOTE
• Since it is not possible to do unit checking for this sensor,
judge the sensor is faulty if the relating electric circuit is
normal.
1. Disconnect the connector, and turn the main key switch "ON"
position.
2. Measure the voltage with a voltmeter across the terminals
shown in the table below.
3. If the reference value is not indicated as shown in the table
below, check the relating electric circuit.
Key switch at
Voltage
"ON"
(1) Traveling Speed Sensor
8-S27
ELECTRICAL SYSTEM
Terminal 1 – Approx. battery
Chassis voltage
Terminal 2 –
Approx. 5 V
Chassis
(2) Connector (Harness Side)
9Y1210946ELS0045US0
KiSC issued 01, 2014 A