wsm RTV-X1120D Workshop Manual page 278

RTV-X900, RTV-X1120D, WSM
Rear Shock Absorber
1. Jack up the rear drive shaft.
2. Remove the rear shock absorber (1).
(When reassembling)
• Apply grease (Shell Godus S5 T100 or equivalent) to the rear
shock absorber bushing before inserting collar.
(1) Rear Shock Absorber
Rear Drive Shaft
NOTE
• Do not exceed the range ±25 ° while handling.
1. Remove the rear stabilizer (6) and stabilizer linkage (5).
2. Remove the rear arm mounting bolts and nuts.
3. Remove the rear upper arm (2).
4. Remove the rear drive shaft (1) with rear knuckle case (3).
5. Remove the rear lower arm (4).
(When reassembling)
• Apply grease (RAILMASTER or equivalent) to splines of rear
drive shaft.
(1) Drive Shaft
(2) Upper Arm
(3) Knuckle Case
(4) Lower Arm
Hydraulic Lift Cylinder
1. Disconnect the hydraulic hoses.
2. Remove the hydraulic lift cylinder (1) and cylinder bracket.
(1) Hydraulic Lift Cylinder
Power Steering Hose and Return Pipe
1. Disconnect the power steering hose (2).
2. Remove the return pipe (1).
(1) Return Pipe
2-S31
TRANSMISSION
9Y1210946ENS0042US0
(5) Stabilizer Linkage
(6) Rear Stabilizer
A: ±25 °
9Y1210946ENS0043US0
9Y1210946ENS0044US0
(2) Power Steering Hose
9Y1210946ENS0045US0
KiSC issued 01, 2014 A