wsm RTV-X1120D Workshop Manual page 192

RTV-X900, RTV-X1120D, WSM
Replacing Crankshaft Bearing 1
(When removing)
1. Press out the used crankshaft bearing 1 using a crankshaft
bearing 1 replacing tool. (See page G-64.)
(When installing)
1. Clean a new crankshaft bearing 1 and crankshaft journal bore,
and apply engine oil to them.
2. Using a crankshaft bearing 1 replacing tool, press in a new
bearing 1 (2) so that its seam (1) directs toward the exhaust
manifold side. (See figure.)
(Reference)
Dimension (A) Factory specification
(1) Seam
(2) Crankshaft Bearing 1
(3) Cylinder Block
1-S83
ENGINE
0 to 0.3 mm
0 to 0.01 in.
(A) Dimension
(B) 0.37 rad (21 °)
9Y1210946ENS0131US0
KiSC issued 01, 2014 A