wsm RTV-X1120D Workshop Manual page 297

RTV-X900, RTV-X1120D, WSM
Checking Gear
1. Visually check the tooth of gear which comes in contact.
2. If there is any doubt as to the condition of gears, replace it.
13T Spiral Bevel Pinion Shaft, Gear and Ball Bearing
1. Remove the 25T gear by using the gear puller.
2. Check the ball bearing for abrasion, color change or other
damage.
3. If there is any doubt as to the condition of a ball bearing, replace
it.
4. Check both the shaft and the gear surface of the bearing contact
point for abrasion, color change or other damage.
5. If there are any doubt as to the condition of shaft and gear.
Gear Shaft, Gear and Needle Bearing
1. Remove the bearing.
2. Check the needle bearing for abrasion, color, change or other
damage.
3. If there is any doubt as to the condition of a needle bearing,
replace it.
4. Check both the shaft and the gear surface of the bearing contact
point for abrasion, color change or other damage.
5. If there are any doubt as to the condition of shaft and gear.
Back Idle Gear, Shaft and Ball Bearing
1. Check the ball bearing for abrasion, color change, or other
damage.
2. If there is any doubt as to the condition of a ball bearing, replace
it.
3. Check both the shaft and gear bearing surface.
2-S50
TRANSMISSION
9Y1210946TRS0037US0
9Y1210946TRS0038US0
9Y1210946TRS0039US0
9Y1210946TRS0040US0
KiSC issued 01, 2014 A