wsm RTV-X1120D Workshop Manual page 393

RTV-X900, RTV-X1120D, WSM
Steering Controller
1. Disconnect the power steering hoses from the power steering
Controller (1).
2. Remove the power steering controller (1).
(When reassembling)
• Be sure to connect the power steering hoses to their original
position, and tighten them to the specified torque.
Power steering hose
retaining nut
Tightening torque
Power steering Controller
mounting screw
(1) Power Steering Controller
(2) Delivery Hose (Pump Port)
(3) Return Hose (Tank Port)
Rubber Mat and Step
1. Remove the rubber mat (1).
2. Remove the step (2).
(1) Rubber Mat
6-S13
STEERING
22.0 to 25.0 N·m
2.25 to 2.54 kgf·m
16.3 to 18.4 lbf·ft
29.4 to 49.0 N·m
3.00 to 4.99 kgf·m
21.7 to 36.1 lbf·ft
(4) Power Steering Cylinder Hose RH
(R Port)
(5) Power Steering Cylinder Hose LH
(L Port)
9Y1210946STS0011US0
(2) Step
9Y1210946STS0013US0
KiSC issued 01, 2014 A