wsm RTV-X1120D Workshop Manual page 294

RTV-X900, RTV-X1120D, WSM
Servo Piston Assembly
1. Remove the servo piston assembly mounting hex. head screw.
2. Pull out the servo piston assembly (2) sightly by the hand.
(When reassembling)
• Replace the gasket with new one.
NOTE
• Be careful not to do damage the surface of servo piston.
• Do not disassemble the servo piston assembly, if the there
is no problem.
Servo piston and cover
Tightening torque
mounting screw
(1) Servo Piston Cover
2-S47
TRANSMISSION
18 to 21 N·m
1.9 to 2.1 kgf·m
14 to 15 lbf·ft
(2) Servo Piston Assembly
9Y1210948TRS0029US0
KiSC issued 01, 2014 A