wsm RTV-X1120D Workshop Manual page 356

RTV-X900, RTV-X1120D, WSM
Knuckle Case
NOTE
• CV joint shall not exceed the allowable bend angle ±25 °
when being reassembled or disassembled.
1. Remove the lower arm (2) and upper arm (1) mounting screws
and nuts.
2. Support the CV joint (4) by something like a clamp (5) to prevent
the CV joint (4) falling before removing the knuckle case
assembly (3).
3. Remove the knuckle case assembly (3).
4. Remove the CV joint (4).
(When resembling)
• Apply anti-fitting grease (RAILMASTER or equivalent) to the
spline of CV joint (4).
(1) Upper Arm
(2) Lower Arm
(3) Knuckle Case Assembly
(4) CV Joint
(5) Clamp
5-S9
FRONT AXLE
A: Apply to grease.
B: ± 25 °
9Y1210946FAS0010US0
KiSC issued 01, 2014 A