RTV-X900, RTV-X1120D, WSM
Front Cover and Dipstick
1. Remove the front cover (1) with input shaft (2).
2. Remove the dipstick (4).
(When reassembling)
• Be sure set the shims (3) to front cover (1).
(1) Front Cover
(2) Input Shaft
Shaft Assemblies
1. Remove the bolt (6) and spring (7) and ball (8).
2. Remove the four wheel drive gear shaft (5).
3. Remove the shaft assembly with shifter (10).
(When reassembling)
• Use same number of shim (9) as before disassembling.
(1) 17T-23T-11T Gear Shaft
(2) Idle Gear Shaft
(3) Range Gear Shaft Assembly
(4) 13T Spiral Bevel Pinion Shaft
(5) Four Wheel Drive Gear Shaft
2-S39
TRANSMISSION
(3) Shim
(4) Dipstick
9Y1210946TRS0027US0
(6) Bolt
(7) Spring
(8) Ball
(9) Shim
(10) Shifter
9Y1210946TRS0028US0
KiSC issued 01, 2014 A