wsm RTV-X1120D Workshop Manual page 257

RTV-X900, RTV-X1120D, WSM
(Continued)
NOTE
• High pressure gauge is 29.4 MPa (300 kgf/cm
scale.
(When reassembling)
• Be careful not to damage O-ring on plug.
Condition
• Engine speed:
Maximum while transmission stalling
• Oil temperature:
45 to 55 °C (113 to 131 °F)
Checking Neutral
CAUTION
• Park the machine on a hard and level surface.
• If it is necessary to run engine in an enclosed area, use a
gas tight exhaust pipe extension to remove the fumes.
• Always try to work in a well-ventilated area.
• Lift up and secure with jack stands or blocking the front of
machine, do not run the machine while adjusting.
• Work by two people when you checking and adjusting
neutral.
NOTE
• The hex. socket plug is securely tightened. Therefore, it is
very important to use a proper-sized allen wrench and fit it
securely onto the plug. Do not give a shock but put your
weight on the plug slowly, paying attention not to damage
its hex. socket section. If the allen wrench is fitted on the
plug at a slant or an improper-sized allen wrench is used to
loose the plug, the hex. socket section will be damaged and
you won't be able to loose the plug.
2-S10
TRANSMISSION
2
, 4267 psi) full
9Y1210946TRS0008US0
(To be continued)
KiSC issued 01, 2014 A