wsm RTV-X1120D Workshop Manual page 155

RTV-X900, RTV-X1120D, WSM
Valves
1. Remove the valve caps (4).
2. Remove the valve spring collet (3), pushing the valve spring
retainer (2) by valve spring replacer (1).
3. Remove the valve spring retainer (2), valve spring (5) and valve
stem seal (6).
4. Remove the valve (7).
(When reassembling)
• Wash the valve stem and valve guide hole, and apply engine oil
sufficiently.
• After installing the valve spring collets, lightly tap the stem to
assure proper fit with a plastic hammer.
IMPORTANT
• Do not change the combination of valve and valve guide.
(1) Valve Spring Replacer
(2) Valve Spring Retainer
(3) Valve Spring Collet
(4) Valve Cap
Thermostat Assembly
1. Remove the thermostat cover mounting screws (1), and remove
the thermostat cover (2).
2. Remove the thermostat assembly (4).
(When reassembling)
• Replace the gasket (3) with a new one.
(1) Thermostat Cover Mounting Screw
(2) Thermostat Cover
Water Pump Assembly (If necessary)
1. Loosen the alternator mounting screws, and remove the
alternator belt.
2. Remove the fan and fan pulley.
3. Remove the water pump assembly (1) from the gear case cover
(3).
(When reassembling)
• Replace the gasket (2) with a new one.
(1) Water Pump Assembly
(2) Water Pump Gasket
1-S46
ENGINE
(5) Valve Spring
(6) Valve Stem Seal
(7) Valve
9Y1210946ENS0060US0
(3) Thermostat Cover Gasket
(4) Thermostat Assembly
9Y1210946ENS0061US0
(3) Gear Case Cover
9Y1210946ENS0062US0
KiSC issued 01, 2014 A