wsm RTV-X1120D Workshop Manual page 259

RTV-X900, RTV-X1120D, WSM
Checking Travelling Speed
CAUTION
• Park the machine on a hard and level surface.
• If it is necessary to run engine in an enclosed area, use a
gas tight exhaust pipe extension to remove the fumes.
• Always try to work in a well-ventilated area.
• Lift up and secure with jack stands or blocking the front of
machine, do not run the machine while adjusting.
• Work by two people when you checking and adjusting
travelling speed.
1. Set the 4WD lever to 2WD position.
2. Start the engine and shift the range shift lever in H position and
depress the differential lock pedal.
3. Depress the speed control pedal (2) fully, and check the travel
speed of panel.
4. If the measurement is not within the factory specification, loosen
the lock nut and adjust the length of the speed control pedal
stopper bolt (1).
[RTV-X900]
Travel speed Reference
[RTV-X1120D]
Travel speed Reference
(1) Speed Control Pedal Stopper Bolt
(2) Speed Control Pedal
2-S12
TRANSMISSION
25 to 27 mile/h
40 to 43 km/h
31 to 32 mile/h
50 to 52 km/h
(3) Panel
9Y1210946TRS0010US0
KiSC issued 01, 2014 A