wsm RTV-X1120D Workshop Manual page 264

RTV-X900, RTV-X1120D, WSM
Checking Differential Lock Cable
(Adjustment of the length of the cable for differential lock)
CAUTION
• When checking, park the machine on flat ground, apply the
parking brake.
1. Check that the cable to the transmission case, with the cable
outer section screw being set near the center.
2. Adjust the length of the cable outer section so that the
differential lock spring (6) has no play, and tighten the lock nut
(4).
3. Hook the end of wire to the hole.
4. Install the wire (1) on the stay, set the adjusting at the center
position "C".
5. Hook the spring (2).
6. Adjust the wire (1) on the stay, set the top of thread "D".
(1) Wire
(2) Spring
(3) Differential Lock Cable
(4) Lock Nut
(5) Lock Nut
(6) Differential Lock Spring
(7) Differential Lock Lever
(8) Knob
2-S17
TRANSMISSION
A: Apply spray grease to pins.
B: Adjust the nuts.
C: Center of thread
D: Adjust the top of tread
9Y1210946TRS0015US0
KiSC issued 01, 2014 A