wsm RTV-X1120D Workshop Manual page 133

RTV-X900, RTV-X1120D, WSM
Nozzle Holder
1. Secure the nozzle retaining nut (7) with a vise.
2. Remove the nozzle holder (1), and remove parts inside.
(When reassembling)
• Assemble the nozzle in clean fuel oil.
• Install the push rod (4), noting its direction.
• After assembling the nozzle, be sure to adjust the fuel injection
pressure.
Nozzle holder
Overflow pipe retaining nut
(RTV-X900: D902)
Tightening torque
Overflow pipe retaining nut
(RTV-X1120D: D1105)
Nozzle holder assembly
(1) Nozzle Holder
(2) Adjusting Washer
(3) Nozzle Spring
(4) Push Rod
1-S24
ENGINE
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
20 to 24 N·m
2.0 to 2.5 kgf·m
15 to 18 lbf·ft
35 to 39 N·m
3.5 to 4.0 kgf·m
26 to 28 lbf·ft
49 to 68 N·m
5.0 to 7.0 kgf·m
37 to 50 lbf·ft
(5) Distance Piece
(6) Nozzle Piece
(7) Nozzle Retaining Nut
9Y1210946ENS0023US0
KiSC issued 01, 2014 A