wsm RTV-X1120D Workshop Manual page 462

RTV-X900, RTV-X1120D, WSM
Seat Switch Continuity (RTV-X1120D Only)
1. Disconnect the 2P connectors (2) from seat switch (1).
2. Connect the circuit tester to the terminals.
When switch is pushed
Resistance
When switch is released
(1) Seat Switch
4WD Switch Continuity
1. Remove the side cover.
2. Disconnect the connector (2).
3. Connect the circuit tester to the 4WD switch leads.
4. Measure the resistance between leads.
5. If the 4WD switch (1) is problem, replace it.
When switch is pushed
Resistance (Across
switch terminal)
When switch is released
(1) 4WD Switch
8-S20
ELECTRICAL SYSTEM
Continuity
Infinity
(2) 2P connector
9Y1210946ELS0033US0
Infinity
Continuity
(2) Connector
9Y1210946ELS0034US0
KiSC issued 01, 2014 A