Vpls Configuration Examples; Static Pw Configuration Example - HP 6127xlg Configuration Manual

Task
Display VSI information.
Display information about automatically
discovered VPLS PEs.
Display VPLS label block information.
Display BGP L2VPN peer group information.
Display VPLS PE information discovered by
BGP.
Display VPLS label block information
discovered by BGP.
Display BGP L2VPN peer information.
Display BGP L2VPN update group
information.
Clear MAC address entries for VSIs.
Reset L2VPN BGP sessions.
Clear packet statistics on an Ethernet service
instance.
For more information about the display bgp group l2vpn, display bgp peer l2vpn, display bgp
update-group l2vpn, and reset bgp commands, see Layer 3—IP Routing Command Reference.

VPLS configuration examples

Static PW configuration example

Network requirements
Configure VPLS on each PE, and establish static PWs between the PEs to interconnect the CEs.
Command
display l2vpn vsi [ name vsi-name ] [ verbose ]
display l2vpn auto-discovery [ peer ip-address ] [ vsi
vsi-name ]
display l2vpn bgp [ peer ip-address | local ] [ vsi vsi-name ]
[ verbose ]
display bgp group l2vpn [ group-name group-name ]
display bgp l2vpn auto-discovery [ peer ip-address
{ advertised | received } [ statistics ] | route-distinguisher
route-distinguisher [ pe-address ip-address [ advertise-info ] ]
| statistics ]
display bgp l2vpn signaling [ peer ip-address { advertised |
received } [ statistics ] | route-distinguisher route-distinguisher
[ site-id site-id [ label-offset label-offset [ advertise-info ] ] ] |
statistics ]
display bgp peer l2vpn [ ip-address mask-length |
{ ip-address | group-name group-name } log-info |
[ [ ip-address ] verbose ] [ standby slot slot-number ] ]
display bgp update-group l2vpn [ ip-address ]
reset l2vpn mac-address [ vsi vsi-name ]
reset bgp { as-number | ip-address [ mask-length ] | all |
external | group group-name | internal } l2vpn
reset l2vpn statistics ac [ interface interface-type
interface-number service-instance instance-id ]
388