HP 6127xlg Configuration Manual page 452

Step
4. Configure an IBGP peer.
5. Enter BGP-VPN IPv4 unicast
address family view.
6. Enable BGP to exchange
IPv4 unicast routes with the
peer.
7. (Optional.) Configure the
system to be the RR, and
specify the peer as the client
of the RR.
8. Redistribute remote site
routes advertised by the PE
into BGP.
9. (Optional.) Configure
filtering of advertised routes.
10. (Optional.) Configure
filtering of received routes.
2. Configure a VPN site:
Step
1. Enter system view.
2. Enter BGP view.
3. Configure the MCE as an
IBGP peer.
4. Enter BGP-VPN IPv4 unicast
address family view.
5. Enable BGP to exchange
IPv4 unicast routes with the
peer.
Command
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address
[ mask-length ] } enable
peer { group-name | ip-address
[ mask-length ] } reflect-client
import-route protocol
[ process-id | all-processes ]
[ med med-value | route-policy
route-policy-name ] *
filter-policy { acl-number |
prefix-list prefix-list-name }
export [ protocol process-id ]
filter-policy { acl-number |
prefix-list prefix-list-name }
import
Command
system-view
bgp as-number
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family ipv4 [ unicast ]
peer { group-name | ip-address
[ mask-length ] } enable
443
Remarks
N/A
N/A
By default, BGP does not
exchange IPv4 unicast routes
with any peer.
By default, no RR or RR client is
configured.
After you configure a VPN site as
an IBGP peer, the MCE does not
advertise the BGP routes learned
from the VPN site to other IBGP
peers, including VPNv4 peers.
The MCE advertises routes
learned from a VPN site only
when you configure the VPN site
as a client of the RR (the MCE).
By default, no routes are
redistributed into BGP.
By default, BGP does not filter
advertised routes.
By default, BGP does not filter
received routes.
Remarks
N/A
N/A
N/A
N/A
By default, BGP does not
exchange IPv4 unicast routes
with any peer.