Configuring Inter-As Option C - HP 6127xlg Configuration Manual

Blade switch series
Hide thumbs Also See for 6127xlg:
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter interface view of the
interface connected to an
internal router of the AS.
3.
Enable MPLS on the interface.
4.
Enable MPLS LDP on the
interface.
5.
Return to system view.
6.
Enter interface view of the
interface connecting to the
remote ASBR.
7.
Enable MPLS on the interface.
8.
Return to system view.
9.
Enter BGP view.
10.
Create a BGP peer.
11.
Enter BGP VPNv4 address
family view.
12.
Enable BGP to exchange
VPNv4 routes with the PE in
the same AS and the ASBR in
different ASs.
13.
Disable route target based
filtering of VPNv4 routes.

Configuring inter-AS option C

To configure inter-AS option C, configure PEs and ASBRs.
PE configuration:
Configure basic MPLS L3VPN, and specify the PE in another AS as an MP-EBGP peer. The route
targets for the VPN instances on the PEs in different ASs must match for the same VPN.
Execute the peer ebgp-max-hop command to enable the local router to establish an EBGP
session to an indirectly-connected peer because the PEs are not directly connected.
Specify the ASBR in the same AS as an IBGP peer, and enable BGP to exchange labeled IPv4
unicast routes with the ASBR.
Command
system-view
interface interface-type
interface-number
mpls enable
mpls ldp enable
quit
interface interface-type
interface-number
mpls enable
quit
bgp as-number
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
address-family vpnv4
peer { group-name | ip-address
[ mask-length ] } enable
undo policy vpn-target
193
Remarks
N/A
N/A
By default, MPLS is disabled on the
interface.
By default, MPLS LDP is disabled
on the interface.
N/A
N/A
By default, MPLS is disabled on the
interface.
N/A
N/A
By default, no BGP peer is
configured.
Configure PEs in the same AS as
IBGP peers, and ASBRs in different
ASs as EBGP peers.
N/A
By default, BGP cannot exchange
VPNv4 routing information with a
peer.
By default, the PE filters received
VPNv4 routes by route targets.
The routes surviving the filtering
are added to the routing table, and
the others are discarded.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents