HP 6127xlg Configuration Manual page 154

RSVP neighbor view—Configuration applies only to RSVP security associations with the specified
•
RSVP neighbor.
Interface view—Configuration applies only to RSVP security associations established on the current
•
interface.
Configurations in RSVP neighbor view, interface view, and RSVP view are in descending order of priority.
To configure RSVP authentication in RSVP neighbor view:
Step
1. Enter system view.
2. Enter RSVP view.
3. Create an RSVP
authentication neighbor and
enter RSVP neighbor view.
4. Enable RSVP authentication
for the RSVP neighbor and
specify the authentication key.
5. Enable challenge-response
handshake for the RSVP
neighbor.
6. Configure the idle timeout for
the RSVP security associations
with the RSVP neighbor.
7. Specify the maximum number
of out-of-sequence RSVP
authentication messages that
can be received from the RSVP
neighbor.
To configure RSVP authentication in interface view:
Step
1. Enter system view.
2. Enter interface view.
3. Enable RSVP authentication
on the interface and configure
the authentication key.
4. Enable challenge-response
handshake on the interface.
5. Configure the idle timeout for
RSVP security associations on
the interface.
Command
system-view
rsvp
peer ip-address
authentication key { cipher |
plain } auth-key
authentication challenge
authentication lifetime life-time
authentication window-size
number
Command
system-view
interface interface-type
interface-number
rsvp authentication key { cipher |
plain } auth-key
rsvp authentication challenge
rsvp authentication lifetime
life-time
145
Remarks
N/A
N/A
By default, the device does not
have any RSVP authentication
neighbors.
By default, RSVP authentication is
disabled.
By default, the challenge-response
handshake function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).
By default, only one RSVP
authenticated message can be
received out of sequence.
Remarks
N/A
N/A
By default, RSVP authentication is
disabled.
Do not enable both RSVP
authentication and FRR on the
same interface.
By default, the challenge-response
handshake function is disabled.
By default, the idle timeout is 1800
seconds (30 minutes).