Configuring Routing Between Pes; Configuring Bgp Vpnv6 Route Control - HP 6127xlg Configuration Manual

Blade switch series
Hide thumbs Also See for 6127xlg:
Table of Contents

Advertisement

Step
4.
Create the BGP IPv6 unicast
family and enter its view.
5.
Enable IPv6 unicast route
exchange with the specified
peer or peer group.
6.
(Optional.) Configure route
redistribution.

Configuring routing between PEs

Step
1.
Enter system view.
2.
Enter BGP view.
3.
Configure the remote PE as
the peer.
4.
Specify the source interface
for route update packets sent
to the specified peer.
5.
Create the BGP VPNv6
address family and enter its
view.
6.
Enable BGP VPNv6 route
exchange with the specified
peer.

Configuring BGP VPNv6 route control

BGP VPNv6 route control is configured similarly with BGP route control, except that it is configured in
BGP VPNv6 address family view. For detailed information about BGP route control, see Layer 3—IP
Routing Configuration Guide.
To configure BGP VPNv6 route control:
Step
1.
Enter system view.
2.
Enter BGP view.
3.
Enter BGP VPNv6 address
family view.
Command
address-family ipv6 [ unicast ]
peer { group-name |
ipv6-address [ prefix-length ] }
enable
import-route protocol
[ process-id [ med med-value |
route-policy route-policy-name ]
* ]
Command
system-view
bgp as-number
peer { group-name | ip-address
[ mask-length ] } as-number
as-number
peer { group-name | ip-address
[ mask-length ] } connect-interface
interface-type interface-number
address-family vpnv6
peer { group-name | ip-address
[ mask-length ] } enable
Command
system-view
bgp as-number
address-family vpnv6
286
Remarks
By default, the BGP IPv6 unicast
family is not created.
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
A CE must redistribute its routes
to the PE so the PE can advertise
them to the peer CE.
Remarks
N/A
N/A
By default, no BGP peer is
configured.
By default, BGP uses the outbound
interface of the best route destined
to the BGP peer as the source
interface.
By default, the BGP VPNv6
address family is not created.
By default, BGP does not exchange
BGP VPNv6 routes with any peer.
Remarks
N/A
N/A
N/A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents