HP 6127xlg Configuration Manual page 221

Figure 63 Network diagram
Table 13 Interface and IP address assignment
Device
Spoke-CE 1
Spoke-PE 1
Spoke-CE 2
Spoke-PE 2
Configuration procedure
1. Configure an IGP on the MPLS backbone to ensure IP connectivity within the backbone:
# Configure Spoke-PE 1.
<Spoke-PE1> system-view
[Spoke-PE1] interface loopback 0
[Spoke-PE1-LoopBack0] ip address 1.1.1.9 32
[Spoke-PE1-LoopBack0] quit
[Spoke-PE1] interface vlan-interface 4
[Spoke-PE1-Vlan-interface4] ip address 172.1.1.1 24
[Spoke-PE1-Vlan-interface4] quit
[Spoke-PE1] ospf
[Spoke-PE1-ospf-1] area 0
[Spoke-PE1-ospf-1-area-0.0.0.0] network 172.1.1.0 0.0.0.255
[Spoke-PE1-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
[Spoke-PE1-ospf-1-area-0.0.0.0] quit
Interface IP address
Vlan-int2 10.1.1.1/24
Loop0 1.1.1.9/32
Vlan-int2 10.1.1.2/24
Vlan-int4 172.1.1.1/24
Vlan-int3 10.2.1.1/24
Loop0 3.3.3.9/32
Vlan-int3 10.2.1.2/24
Vlan-int5 172.2.1.1/24
Device Interface
Hub-CE Vlan-int6
Vlan-int7
Hub-PE Loop0
Vlan-int4
Vlan-int5
Vlan-int6
Vlan-int7
212
IP address
10.3.1.1/24
10.4.1.1/24
2.2.2.9/32
172.1.1.2/24
172.2.1.2/24
10.3.1.2/24
10.4.1.2/24