Enabling Mpls Forwarding Statistics; Enabling Snmp Notifications For Mpls; Displaying And Maintaining Mpls - HP 6127xlg Configuration Manual

Enabling MPLS forwarding statistics

MPLS label forwarding forwards a labeled packet based on its incoming label.
Perform this task to enable MPLS label forwarding statistics and MPLS statistics reading, so that you can
use the display mpls lsp verbose command to view MPLS label statistics.
To enable MPLS label forwarding statistics:
Step
1. Enter system view.
2. Enable MPLS label
forwarding statistics for
specific LSPs.
3. Enable MPLS label
statistics reading, and
specify the reading
interval.

Enabling SNMP notifications for MPLS

This feature enables MPLS to generate SNMP notifications. The generated SNMP notifications are sent to
the SNMP module.
For more information about SNMP notifications, see Network Management and Monitoring
Configuration Guide.
To enable SNMP notifications for MPLS:
Step
1. Enter system view.
2. Enable SNMP notifications
for MPLS.

Displaying and maintaining MPLS

Execute display commands in any view and reset commands in user view.
Task
Display MPLS interface information.
Display usage information about MPLS
labels.
Command
system-view
mpls statistics { all | [ vpn-instance
vpn-instance-name ] { ipv4
ipv4-destination mask-length | ipv6
ipv6-destination prefix-length } | static
| te ingress-lsr-id tunnel-id }
mpls statistics interval interval
Command
system-view
snmp-agent trap enable mpls
Command
display mpls interface [ interface-type interface-number ]
display mpls label { label-value1 [ to label-value2 ] | all }
10
Remarks
N/A
By default, MPLS label forwarding
statistics are disabled for all LSPs.
By default, MPLS label statistics
reading is disabled.
Remarks
N/A
By default, SNMP notifications for
MPLS are enabled.