HP 6127xlg Configuration Manual page 115

Blade switch series
Hide thumbs Also See for 6127xlg:
Table of Contents

Advertisement

Destination
: 4.4.4.9
FEC
: 1.1.1.9/1/30478
Protocol
: RSVP
LSR Type
: Ingress
Service
: -
NHLFE ID
: 1027
State
: Active
Out-Label
: 1149
Nexthop
: 10.1.1.2
Out-Interface: Vlan1
Destination
: 4.4.4.9
FEC
: 1.1.1.9/1/30478
Protocol
: RSVP
LSR Type
: Egress
Service
: -
In-Label
: 1151
State
: Active
Nexthop
: 127.0.0.1
Out-Interface: -
Destination
: 10.1.1.2
FEC
: 10.1.1.2
Protocol
: Local
LSR Type
: Ingress
Service
: -
NHLFE ID
: 1026
State
: Active
Nexthop
: 10.1.1.2
Out-Interface: Vlan1
# Execute the display interface tunnel command on Switch D. The output shows that the tunnel interface
is up.
[SwitchD] display interface tunnel
Tunnel4 current state: UP
Line protocol current state: UP
Description: Tunnel8 Interface
The Maximum Transmit Unit is 64000
Internet Address is 8.1.1.1/24 Primary
Tunnel source unknown, destination 1.1.1.9
Tunnel bandwidth 64 (kbps)
Tunnel TTL 255
Tunnel protocol/transport CR_LSP
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 drops
0 packets output, 0 bytes, 0 drops
106

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents