HP 6127xlg Configuration Manual page 421

[NPE3] vlan 10
[NPE3-vlan10] port ten-gigabitethernet 1/0/1
[NPE3-vlan10] quit
# On interface Ten-GigabitEthernet 1/0/1 (the interface connected to CE 3), create an Ethernet
service instance and bind the Ethernet service instance to VSI aaa.
[NPE3] interface ten-gigabitethernet 1/0/1
[NPE3-Ten-GigabitEthernet1/0/1] service-instance 1000
[NPE3-Ten-GigabitEthernet1/0/1-srv1000] encapsulation s-vid 10
[NPE3-Ten-GigabitEthernet1/0/1-srv1000] xconnect vsi aaa
[NPE3-Ten-GigabitEthernet1/0/1-srv1000] quit
Verifying the configuration
# Verify that PWs in up state have been established on each PE.
[UPE] display l2vpn pw verbose
VSI Name: aaa
Peer: 2.2.2.2
Signaling Protocol
Link ID
In Label
Wait to Restore Time: 0 sec
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
Peer: 3.3.3.3
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
[NPE1] display l2vpn pw verbose
VSI Name: aaa
Peer: 1.1.1.1
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
PW ID: 500
: LDP
: 8 PW State : Up
: 131151 Out Label: 131279
: 1500
: Main
: -
: -
: 0x1800000260000002
: 137
PW ID: 500
: LDP
: 8 PW State : Blocked
: 131150 Out Label: 131279
: 1500
: Backup
: -
: -
: 0x1800000360000003
: 135
PW ID: 500
: LDP
: 8 PW State : Up
: 131279 Out Label: 131151
: 1500
: Main, No-split-horizon
: -
: -
: 0x180000060000000
: 136
412