HP 6127xlg Configuration Manual page 476

Blade switch series
Hide thumbs Also See for 6127xlg:
Table of Contents

Advertisement

Step
2.
Create a RIPng process for an
IPv6 VPN instance and enter
RIPng view.
3.
Redistribute VPN routes.
4.
(Optional.) Configure the
default cost value for
redistributed routes.
5.
Return to system view.
6.
Enter interface view.
7.
Enable the RIPng process on
the interface.
Configuring OSPFv3 between an MCE and a PE
Step
Enter system view.
1.
2.
Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
3.
Set the router ID.
4.
Disable routing loop
detection.
5.
(Optional.) Configure an
OSPFv3 domain ID.
6.
Redistribute VPN routes.
7.
(Optional.) Configure filtering
of advertised routes.
8.
(Optional.) Configure the
default external route tag for
redistributed VPN routes.
9.
Return to system view.
Command
ripng [ process-id ] vpn-instance
vpn-instance-name
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost |
route-policy route-policy-name ] *
default cost value
quit
interface interface-type
interface-number
ripng process-id enable
Command
system-view
ospfv3 [ process-id | vpn-instance
vpn-instance-name ] *
router-id router-id
vpn-instance-capability simple
domain-id { domain-id
[ secondary ] | null }
import-route protocol [ process-id
| all-processes | allow-ibgp ] [ cost
cost | nssa-only | route-policy
route-policy-name | tag tag | type
type ] *
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
default tag tag
quit
467
Remarks
N/A
By default, no routes are
redistributed into RIPng.
The default value is 0.
N/A
N/A
By default, RIPng is disabled on an
interface.
Remarks
N/A
N/A
N/A
By default, routing loop detection
is enabled.
On an MCE network, you must
disable routing loop detection for
an OSPFv3 VRF process.
Otherwise, the MCE does not
receive OSPFv3 routes from the PE.
The default domain ID is 0.
By default, no routes are
redistributed into OSPFv3.
By default, redistributed routes are
not filtered.
By default, the default external
route tag is 1.
N/A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents