Mce Configuration Task List - HP 6127xlg Configuration Manual

Figure 109 Network diagram for the MCE function
As shown in
routes to the routing tables of corresponding VPN instances.
Route exchange between MCE and VPN site—Create VPN instances VPN 1 and VPN 2 on the
•
MCE. Bind VLAN-interface 2 to VPN 1, and VLAN-interface 3 to VPN 2. The MCE adds a received
route to the routing table of the VPN instance that is bound to the receiving VLAN interface.
• Route exchange between MCE and PE—The MCE connects to PE 1 through a trunk link that permits
VLAN 2 and VLAN 3. On PE 1, create VPN instances VPN 1 and VPN 2. Bind VLAN-interface 2
to VPN 1, and VLAN-interface 3 to VPN 2. The MCE and PE add a received route to the routing
table of the VPN instance that is bound to the receiving VLAN interface.
You can configure static routes, RIP, OSPF, IS-IS, EBGP, or IBGP between an MCE and a VPN site and
between an MCE and a PE.
NOTE:
To implement dynamic IP assignment for DHCP clients in private networks, you can configure DHCP server
or DHCP relay agent on the MCE. When the MCE functions as the DHCP server, the IP addresses assigned
to different private networks cannot overlap.

MCE configuration task list

Tasks at a glance
Configuring VPN
•
(Required.)
•
(Required.)
13. (Optional.)
Configuring routing on an
•
(Required.)
•
(Required.)
Figure 109, the MCE exchanges private routes with VPN sites and PE 1, and adds the private
instances:
Creating a VPN instance
Associating a VPN instance with an interface
Configuring route related attributes for a VPN instance
MCE:
Configuring routing between an MCE and a VPN site
Configuring routing between an MCE and a PE
435