Displaying And Maintaining Mpls Te - HP 6127xlg Configuration Manual

optimal bypass tunnel because, for example, the reservable bandwidth changes. Therefore, MPLS TE
needs to poll the bypass tunnels periodically to update the optimal bypass tunnel.
Perform this task on the PLR to configure the interval for selecting an optimal bypass tunnel:
Step
1. Enter system view.
2. Enter MPLS TE view.
3. Configure the interval for
selecting an optimal bypass
tunnel.

Displaying and maintaining MPLS TE

Execute display commands in any view and reset commands in user view.
Task
Display information about explicit paths.
Display link and node information in an IS-IS
TEDB.
Display sub-TLV information for IS-IS TE.
Display network information in an IS-IS TEDB.
Display IS-IS tunnel interface information.
Display DS-TE information.
Display bandwidth information on MPLS
TE-enabled interfaces.
Display MPLS TEDB information.
Display information about MPLS TE tunnel
interfaces.
Display link and node information in an OSPF
TEDB.
Display network information in an OSPF TEDB.
Display OSPF tunnel interface information.
Reset the automatic bandwidth adjustment
function.
Command
system-view
mpls te
fast-reroute timer interval
Command
display explicit-path [ path-name ]
display isis mpls te advertisement [ [ level-1 | level-2 ] |
[ originate-system system-id | local ] | verbose ] *
[ process-id ]
display isis mpls te configured-sub-tlvs [ process-id ]
display isis mpls te network [ [ level-1 | level-2 ] | local |
lsp-id lsp-id ]* [ process-id ]
display isis mpls te tunnel [ level-1 | level-2 ] [ process-id ]
display mpls te ds-te
display mpls te link-management bandwidth-allocation
[ interface interface-type interface-number ]
display mpls te tedb { { isis { level-1 | level-2 } | ospf area
area-id } | link ip-address | network | node [ local |
mpls-lsr-id ] | summary }
display mpls te tunnel-interface [ tunnel number ]
display ospf [ process-id ] [ area area-id ] mpls te
advertisement [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te network
[ originate-router advertising-router-id | self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te tunnel
reset mpls te auto-bandwidth-adjustment timers
83
Remarks
N/A
N/A
By default, the interval is 300
seconds.