Power Control Feature; Supported Os; Notes On Using Windows Server 2008 - NEC Express5800 Series Maintenance Manual
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Useful Features
4.
Power Control Feature
Power consumption of the server can be controlled through the Web console of EXPRESSSCOPE Engine 3
(BMC) or by using NEC ESMPRO Manager. This feature curves the upper limit of the power consumption,
which allows more servers to be installed in the environment where the power consumption is limited.
For settings information, refer to "EXPRESSSCOPE Engine 3 User's Guide" or NEC ESMPRO Manager online
help.
4.1
Supported OS
The power control feature is available for the following OSs.
OSs that support the power control feature
•
Windows Server 2008 Standard
•
Windows Server 2008 Enterprise
•
Windows Server 2008 Standard (x64)
•
Windows Server 2008 Enterprise (x64)
•
Windows Server 2008 R2 Standard (x64)
•
Windows Server 2008 R2 Enterprise (x64)
•
Windows Server 2012 Standard x64
•
Windows Server 2012 Datacenter x64
4.2
Notes on Using Windows Server 2008
The event shown below will be logged in Event Viewer if power control feature is used on Windows Server 2008.
However, it is the normal operation and the event is logged because the P-State is controlled by the server side.
Source:
Kernel-Processor-Power
Event ID: 7
Level:
Warning
User:
SYSTEM
Source: Kernel-Processor-Power
Event ID: 7 or 37
Express5800/E120e-M Maintenance Guide
4. Power Control Feature
99
Advertisement
Table of Contents
