Power Control Feature; Supported Os; Notes On Using Windows Server 2008 - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
4.

Power Control Feature

Power consumption of the server can be controlled through the command line interface of EXPRESSSCOPE
Engine 3 (BMC) or by using NEC ESMPRO Manager. This feature curves the upper limit of the power
consumption, which allows more servers to be installed in the environment where the power consumption is
limited.
For settings information, see "EXPRESSSCOPE Engine3 User's Guide" or NEC ESMPRO Manager online
help.
4.1

Supported OS

The power control feature is available for the following OSs.
OSs that support the power control feature
•
Windows Server 2008 Standard (RTM, SP2 or later)
•
Windows Server 2008 Enterprise (RTM, SP2 or later)
•
Windows Server 2008 R2 Standard
•
Windows Server 2008 R2 Enterprise
•
Windows Server 2012 Standard
•
Windows Server 2012 Datacenter
•
Red Hat Enterprise Linux 5.9 or later (x86)
•
Red Hat Enterprise Linux 5.9 or later (EM64T)
•
Red Hat Enterprise Linux 6.4 or later (x86)
•
Red Hat Enterprise Linux 6.4 or later (x86_64)
4.2

Notes on Using Windows Server 2008

Ignore the following event when running Windows Server 2008. This event is logged at the normal operation
of controlling the server power.
100
Source: Kernel-Processor-Power
Event ID: 7
Level: Warning
User: SYSTEM
Source: Kernel-Processor-Power
Event ID: 7 or 37
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
4. Power Control Feature