HDO9000 High Definition Oscilloscopes Operator's Manual
Display Set Up
To access the Display dialog, choose Display > Display Setup.
Display Mode (Q-Scape only)
The Display mode determines the number and layout of display tabs. Choose Normal (default), a
single display with no tabs, or one of the three Q-Scape display modes:
Q-Scape Single, a single set of four tabs stacked so that only one at a time is visible. Each tab
l
can have any style of grid mode, same or different.
Q-Scape Dual, two sets of four stacked tabs. Equivalent tabs in each set share the same grid
l
mode, but can display different traces. You can simultaneously view one tab from each set, but
they must be different numbered tabs (e.g., Tab 1 from set one and Tab 3 from set two).
74