Table of Contents
Advertisement
Firmware Update
Teledyne LeCroy frequently releases free oscilloscope firmware updates containing new product
features and bug fixes. The installer updates multiple components including the base application,
required DLLs, drivers, and low-level microcode for integrated circuits.
The firmware update procedure does not modify or delete any saved panel setups, waveforms, screen
captures, calibration constants, or other data stored on the D: drive.
Caution: The installation may take several minutes, depending on the length of time since
your last update. Do not power down at any point during the installation process.
1. Exit the X-Stream application by choosing File > Exit.
2. Visit our download page at
Oscilloscope Downloads > Firmware Upgrades.
3. Select your series and model number.
4. Enter your registration login information, or create a new account.
5. Click the download link, and choose to Save the installer to the instrument Desktop or a folder
on the D: drive. If downloading from a remote PC, save the installer to a USB storage device to
transfer it to the instrument.
6. Browse to the location of the installer (xstreamdsoinstaller_x.x.x.x.exe) and double-click it to
launch the X-Stream Setup wizard.
7. On the wizard, click Next, then read the EULA and click I Agree.
8. Leave the default installation (recommended), or select individual components:
Drivers for GPIB1 - required for internal PCI-GPIB card.
l
MATLAB MCR - required for sampling scopes, QPHY-USB and QPHY-Broad-R-Reach.
l
X-Stream DSO, DSO Device drivers, Upgrade DSO Microcode - required for a version
l
upgrade.
Touch Screen Driver - required to use the display as a touch screen (you can opt to use
l
a mouse).
SPARQ Package - required to drive a connected SPARQ from the instrument.
l
Click Install when done.
9. If you receive Windows security warnings, trust and Install the file. If you see the Hardware
Programmers screen, accept all code installations, then click Close to return to the X-Stream
Setup wizard.
10. When installation is complete, choose Reboot now and click Finish.
teledynelecroy.com/support/softwaredownload
Maintenance
and click the link to
165
Advertisement
Table of Contents
