Table of Contents
Advertisement
Using MAUI
HD Descriptor Box
The HD descriptor box summarizes the total resolution at which the instrument is operating. When
HD1024 is enabled, this may be 9 or 10 bits depending on the number of active channels and other
timebase settings. Touch the HD descriptor to open the HD Summary dialog, which shows the current
resolution, bandwidth, and other settings per channel. When HD1024 is disabled, the HD descriptor
box is hidden.
Timebase and Trigger Descriptor Boxes
The Timebase descriptor box shows: (clockwise from top right) Horizontal Delay, Time/div, Sample
Rate, Number of Samples, and Sampling Mode (blank when in real-time mode).
Trigger descriptor box shows: (clockwise from top right) Trigger Source and Coupling, Trigger Level
(V), Slope, Trigger Type, Trigger Mode.
Horizontal (time) cursor readout, including the time between cursors and the frequency, is shown
beneath the TimeBase and Trigger descriptor boxes. See the
Cursors
section for more information.
Dialogs
Dialogs appear at the bottom of the display for entering setup data. The top dialog will be the main
entry point for the selected functionality. For convenience, related dialogs appear as a series of tabs
behind the main dialog. Touch the tab to open the dialog.
19
Advertisement
Table of Contents
