Adjust & Intensity; Bottom Row Controls - Teledyne HDO9000 Operator's Manual

Oscilloscope Overview
Press the front panel Type button to apply or remove cursors. Continue pressing to cycle through all
cursor types until the desired type is found ("no cursors" will appear in the cycle).
Turn the Cursor knob to reposition the selected cursor line. Push it to select a different cursor line to
adjust.
Adjust & Intensity
The front panel Adjust knob changes the value in active (highlighted) data entry fields that do not
have dedicated knobs. Pushing Adjust toggles between coarse (large increment) or fine (small
increment) adjustments when the knob is turned.
The Intensity button sets the Adjust knob to control the trace intensity. When more data is available
than can actually be displayed, the Intensity button helps to visualize significant events by applying
an algorithm that dims less frequently occurring samples. This feature can also be accessed from
the Display Setup dialog.

Bottom Row Controls

Decode opens the Serial Decode dialog if you have serial data decoder options installed.
WaveScan opens the WaveScan dialog.
Spectrum opens the Spectrum Analyzer dialog if you have that option installed.
History opens the History Mode dialog.
9