Auxiliary Output - Teledyne HDO9000 Operator's Manual

HDO9000 High Definition Oscilloscopes Operator's Manual

Auxiliary Output

Use the Aux Output dialog to configure the output of the Aux Out port.
Auxiliary Output
Trigger Enabled sends a pulse when the trigger is ready (Ready indicator lit), but not necessarily
triggered. It can be used as a gating function to trigger another instrument. Enter the desired pulse
Amplitude.
Trigger Out sends a pulse upon a trigger (TRIG'D Indicator lit). Enter the desired pulse Amplitude.
Pass/Fail generates a pulse when Pass/Fail testing is active and conditions are met. Enter the
desired Pulse Duration.
Fast Edge provides a fast edge signal that can be used to deskew multiple channels.
Off disables auxiliary input/output.
Calibration Output
Choose the signal to be output from the Cal Out hook on the front of the instrument:
Square wave signal. Enter the wave Frequency and Amplitude into 1 MΩ, or choose to Set to 1
l
kHz, 1 V Square Wave.
Reference DC Level. Enter an Amplitude into 1 MΩ.
l
Off disables calibration output.
154