Grid Mode; Grid Intensity - Teledyne HDO9000 Operator's Manual

HDO9000 High Definition Oscilloscopes Operator's Manual
Tip: To take advantage of more grid styles on the larger display, choose File > Windowed on
the instrument, then grab the window title bar and drag it to the external monitor screen. Drag
the Extended Display window to the instrument screen.

Grid Mode

In Normal Display Mode, select one Grid Mode. In Q-Scape Display Mode, select a Grid Mode for
each tab. The selection icon shows the number and arrangement of grids.
Grid Mode Number Orientation Notes
Auto variable
(default)
Single 1
Dual 2
Tandem 2
Triplex 3
Triad 3
Quad 4
Quattro 4
Octal 8
Twelve 12
Sixteen 16
XY 1
XYSingle 2
XYDual 3
Note: Additional grid modes may become available with the installation of software options.

Grid Intensity

To dim or brighten the background grid lines, touch Grid Intensity and enter a value from 0 to 100.
Grid on top superimposes the grid over the waveform.
Note: Some waveforms may be hidden from view with the grid on top.
Axis labels display the values represented by each division of the grid, based on your vertical scale
and timebase. Turned on by default, they may appear as absolute values or delta from center (0).
Deselect the checkboxbox to remove them from the display.
76
landscape Automatically adds or deletes grids as traces turned on/off, up to the maximum
supported
landscape All traces share one grid
landscape One top, one bottom
portrait One left, one right
landscape Stacked top to bottom
portrait Left, center, right
landscape Stacked top to bottom
landscape One in each quarter of screen
landscape Two columns of four stacked top to bottom
landscape Three columns of four stacked top to bottom
landscape Four columns of four stacked top to bottom
portrait Single XY type grid
portrait One VT grid left, one XY grid right
variable Two VT grids left, one XY grid right