Moving Traces - Teledyne HDO9000 Operator's Manual

Using MAUI
To use the virtual keypad, touch the soft keys exactly as you would a calculator. When you touch OK,
the calculated value is entered in the field.

Moving Traces

Use any of these methods to move traces from grid to grid. See OneTouch Help for ways to pan
traces within the same grid.
Drag-and-Drop
You can move a trace from one grid to another by dragging its descriptor box to the desired grid. This
is a convenient way to quickly re-arrange traces on the display.
If you are in Q-Scape display mode, you can drag the descriptor box to a grid on another tab, provided
the grid is visible while you are moving the trace. For example, you cannot drag descriptors across
tabs in Q-Scape Single mode, because the target grids aren't visible, but you can in Q-Scape Dual or
Q-Scape Mosaic modes. This is true even in extended display. For more information, see Display.
Next Grid Button
Touch twice on the descriptor box of the trace you want moved to open the setup dialog, then touch
the Next Grid action toolbar button at the bottom of the dialog. You can also touch and hold (right-
click) the trace descriptor box and choose Next Grid from the context menu.
Note: If only one grid is open, a second grid opens automatically when you select Next Grid.
29