Tip: If you are using the
To pan at an accelerated rate, swipe the trace right/left or up/down.
Zoom
To create a new zoom trace, touch then drag diagonally to draw a selection box around the portion of
the trace you want to zoom. Touch the Zx descriptor box to open the zoom factor controls and adjust
the zoom exactly.
To "zoom in" on any trace, unpinch two fingers over the trace horizontally.
To "zoom out" on any trace, pinch two fingers over the trace horizontally.
Note: Pinch gestures do not create a separate zoom (Zx) trace, they only adjust the Horizontal
Scale. When you pinch a channel (Cx) trace, the Timebase for all channels changes. If the
trace is the source of any other, all its dependent traces change as well.
multi-zoom
feature, all time-locked traces will pan together.
Using MAUI
25