Onetouch Help; Turn On; Activate - Teledyne HDO9000 Operator's Manual

Using MAUI

OneTouch Help

Touch, drag, swipe, pinch, and flick can be used to create and change setups with one touch. Just as
you change the display by using the setup dialogs, you can change the setups by moving different
display objects. Use the setup dialogs to refine OneTouch actions to precise values.
As you drag & drop objects, valid targets are outlined with a white box. When you're moving over
invalid targets, you'll see the "Null" symbol ( Ø ) under your finger tip or cursor.

Turn On

To turn on a new channel, math, memory, or zoom trace, drag any descriptor box of the same type to
the Add New ("+") box. The next trace in the series will be added to the display at the default settings.
It is now the active trace.
If there is no descriptor box of the desired type on the screen to drag, touch the Add New box and
choose the trace type from the pop-up menu.
To turn on the Measure table when it is closed, touch the Add New box and choose Measurement.

Activate

Touch a trace or its descriptor box to activate it and bring it to the foreground. When the descriptor
box appears highlighted in blue, front panel controls and touch screen gestures apply to that trace.
21