Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Auto Save
Data that appears on the oscilloscope display, such as waveforms, measurement readouts and
decoder data, can be very dynamic and difficult to read from the oscilloscope unless you stop the
acquisition.
The Auto Save enables you to automatically store waveform and table data to file with each new
trigger. The file can later be recalled to the oscilloscope or saved permanently to external storage.
Caution: If you have frequent triggers, it is possible you will eventually run out of storage
space. Choose Wrap only if you're not concerned about files persisting on the instrument. If
you choose Fill, plan to periodically delete or move files off the instrument, or you will lose
new data.
To disable this feature, choose Off.
By default, waveform files are stored in D:\Waveforms and tables are stored in D:\Tables on the
instrument hard drive.
148
Advertisement
Table of Contents
