Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Store to Memory
To store a trace to internal memory, drag-and-drop its trace descriptor box onto the target memory
(Mx) descriptor box.
Move Trace
To move a trace to a different grid, drag-and-drop the trace descriptor box onto the target grid. If you
are in a multi-tabbed Q-Scape display mode, you can move traces between tabs this way.
Scroll
To scroll long lists of values or readout tables, swipe the selection dialog or table in an up or down
direction.
Pan Trace
To pan a trace, activate it to bring it to the forefront, then drag the waveform trace right/left or
up/down. If it is the source of any other trace, that trace will move, as well. For channel traces, the
Timebase descriptor box will show the new Horizontal Delay value. For other traces, the zoom factor
controls show the new Horizontal Center.
24
Advertisement
Table of Contents
