Table of Contents
Advertisement
HDO9000 High Definition Oscilloscopes Operator's Manual
Digitalx (Group) Set Up
To set up a digital input:
1.
Connect the digital leadset
2. From the menu bar, choose Vertical > Digital <#> Setup, or press the front panel Dig button and
select the desired Digitalx tab.
3. On the Digitalx set up dialog, check the boxes for lines D0 through D15 that comprise the
group.
Touch the Display D0-D7 and Display D8-D15 buttons to quickly turn on the entire digital bank,
or touch the Right and Left Arrow buttons to switch between each digital bank as you make
line selections.
Note:
Each group can consist of anywhere from 1 to 16 of the leads, from either digital
bank regardless of the Logic set on the bank. It does not matter if the some or all of the
lines have been included in other groups.
4. Check View Group to enable the display. Go on to
5. When you're finished on the Digitalx dialog, touch Logic Setup and choose the Logic Family
that applies to each digital bank, or set custom Threshhold and Hysteresis values.
44
to the test device and the instrument.
set up the digital display
for the group.
Advertisement
Table of Contents
